Month: June 2016

Fast Reading Techniques

On: By: zbol2014

Are you tired of wasting your time slowly reading? Indeed, the quick reading will be the most valuable tool for you at this time. Think about that in just a week can double your reading speed, i.e. that will read twice the articles in less time. In this article, will teach you three technical quick read that will help you to significantly increase your speed reading: A technique as simple as follow his own finger with the view it will increase its pace of reading. Use your finger as if it were a pointer that will mark your reading rate.

When the finger reaches the end of the line, lower until the beginning of the next line, carrying his eyes until the first word in that line. Moves the hand by page, following a route letter S-shaped. To practice this technique, find a text of about three thousand words, and try to make a mock of reading in just a minute, moving his hand s on pages. Add five more pages, and then a new mock reading of that section, again in a minute. 3. Read in 2 consists of 2 lines as indicated by the title, read the lines of 2 by 2. To practice, take a newspaper (that have columns) and read an article of 2 in 2 lines. At the end of the reading, write in your notebook what article. If you put into practice these techniques of speed reading, in barely a week your brain will get used to a new reading speed. You will notice it especially when reading the newspaper, because once the technique is incorporated in their habits, you will use it unconsciously and eyes will go more quickly automatically.

LurTech

On: By: zbol2014

In addition, only three products were at the end of offer value-added functionality, of which the LurTech PDF Compressor offered the most benefits. So integrates with a single PDF Compressor Enterprise Enterprise a variety of MFPs, even if it’s different and sometimes even older devices. The scan results are uniformly perfect, on the one hand due to the qualitative improvement of the images, on the other hand by the extreme compression of the scan files on minimum sizes. The optimised electronic documents can be easily in other processes in the company include and send via E-Mail for example. Was flexible, intuitive and extremely powerful convinced MPC capital also by the flexible licensing model of the solution provider. This allows the company a good and cheap entry, but later admits corresponding adjustments when growing needs or changing structures. While you feel working with the PDF compressor as a very intuitive at MPC capital. He is first of all by the administrator via a graphical interface and is completely transparent to the user.

The usual way of working remains: after the scan operation accesses the PDF Compressor Server the image, converted it in a compressed and, where appropriate, full-text enabled PDF or PDF/A file and then drops them in the usual user directory. There she stands for the further processing available. For the user, the interface clearly represents all jobs and functions. Including the display of progress in the processing of documents, which was very good compared to the other products tested was notable from the perspective of Bernard Trier. Provided further satisfaction also, that total the installation on different computers went absolutely easily. Also with regard to the performance and functionality of the software, has words of praise Bernard Trier: the compression of PDF files is really excellent, and also the possibility of PDF settings, such as E.g. scaling of the PDFs are very useful and only in the LurTech solution available.” About MPC capital: Developed the listed wealth and asset manager MPC capital based in Hamburg, initiated, distributes and manages performance-oriented investments for high net worth individuals and institutional investors since 1994 and is the market leader in the area of closed models of participation.

Technical Institute

On: By: zbol2014

The Secretary of Municipal Education, referring to the projection and development of education in this municipality nortecaucano, Santander de Quilichao, noted that the construction of the educational institution in San Antonio will cost between 2 300 and 2 thousand 500 billion pesos. One of the priority issues is education for adults. According to the local official you can speak of a good turnout, since so far there are 40 people registered in each of the 5 courses that are taught in the night shift from the Technical Institute of Santander de Quilichao. That figure is very important, taking into account that in the municipality have been sustaining that process for many years to give possibility to adult persons who work and are parents, complete secondary education said Bustos. Against complaints from some people about the removal of the collection of the Board of Trustees, fee for the Association of parents of the institution, the municipal education Secretary He pointed out do not agree with the way how collected those monies, although necessary for the institution for membership should be voluntary and not compulsory. Projects and works the theme of infrastructure is something worrying, since the budget allocated for this purpose is unable to cover even the priority needs such as the construction of classrooms, the array of covers, among other things.We have three projects that will benefit two communities of African and an Indian, who are the construction of institutions in the sector of El Palmar, San Antonio and guard the conception, noted the Secretary of education of Santander de Quilichao, for which we are still defining resources and making arrangements, concluded the official. The figure 2 thousand million pesos is the amount of resources that would need to Santander de Quilichao to meet priority needs in education. Currently only has a budget of 450 million pesos..

Adriano Zentil Polzin

On: By: zbol2014

The fact of the transport for the modal road to be the majority in Brazil must it four main factors: – politics of the government that privileged the construction of highways, that practically establish connection the country; – implantation and great growth of the automobile industries in the country; – creation of the national park of refinement of oil; – largeness of the domestic territory, leaving the majority of the cities without covering of other modal ones (railroad and maritime mainly). Days (1993) it still points the forms as the companies must lead its services of transport. For it, different types of products, as the amount where they are produced can determine if a company assumes the transport of its products with a proper fleet, or as a terceirizada fleet, or if she all repasses the transport to a specialized company. It is to incase itself in this market of the terceirizao of the transport, that the Adriano Zentil Polzin? , It has ME as one of its objectives of business, the road transport of products. Although being a small business company and few resource, it intends to adopt the strategy in order to become great, using themselves mainly, of the services given for independent vehicles (proprietors of an only vehicle and that they work with this vehicle), that according to Days (1993), for more than answer the half of the national fleet. To be able to give this service, all company has that to emit a fiscal document called Road Bill of landing and Loads, the CTRC..

Resistance To Change Windows

On: By: zbol2014

Really this reflection I came to see the generational change as it occurs every 5 years into the most popular globally, Microsoft Windows Vista operating system. What I mean with this change throughout my 15 years of experience is not only graphic and operational; more than anything is to work that cost you the majority of the people get accustomed to new processes or changes in general in your mode live or work. Regardless of the new presentation and all the advantages that the new system; being a dedicated person to work with computers and have family members, friends, colleagues or general users I have encountered much resistance to change. And this basically because as the person with more knowledge of technology (according to the people at my around); and the facilities that are currently acquire a team of computation that nowadays are all low with Windows Vista. Many of these people have requested that I change them your system to Windows XP, because everything with what this work based on this operating system.

I personally, the I urge to to be kept up to date, that actually for next year already with this trend, programmes and new hardware will be migrated, and that we must adapt to new technologies. However even with this, the people are you rehacias to move their ideas, and who am I to force them?, outside of generate them an invitation because I have to accept your requests (or it is a favor or are paying me). As well as comments as hackneyed as it is very slow, doesn’t work with what I use, are very valid expressions are in terms of their needs. In fact, also is it makes me curious to say that users that we have grown up with computer technology, are resistant to change. But for my thing more interesting, with everything and that from elementary school children who knew no floppy disks, as my students at the University where I teach class. There was where my 7 students have surprised me most? semester of engineering in computer systems; because I thought that this evolution was natural for them, but what is my surprise that the teams that I assigned school in their places, returned them to Windows XP arguing many errors generated in multiple programs and applications. Everything seems to indicate that after all these ideas in change by updating the system, and the huge promotion that has made; everything seems to indicate that Microsoft took a side step informing that there will be support for Windows XP through 2014, and all this because of all these people that I mentioned are right to cling to their way of working. The case is so far personally to my worked me, in my activities, and I’ve adapted to believing that it would be an advantage, however apparently won’t any and we will continue to work as before. Also prepare ourselves for 2010 will appear where the new Windows 7 (Vienna), que ya no is that thinking, if it will be successor of XP or Vista. Do in conclusion, will continue trying to go ahead and break the paradigms of change and your?. Original author and source of the article

Autoshop Manager Information

On: By: zbol2014

Do you drive a Catalogue Customer? It is very important that the software has a catalog management clients, because that is where has all the information of both identification and for tax purposes, the program must provide mechanisms to search for information by multiple data such as name , surname, by the number of phone, address or segments of any of these data. Parts Inventory Do you drive? Because some workshops manage an inventory of spare his own, if this is the case, it is important that the selected program includes a module that allows to control the inputs and outputs of parts by different concepts, such as consumption of spare parts for work orders, entry of new merchandise, transfers between warehouses, settings input and output settings, it is important to be able to define different stores and locations within them for the proper handling of the articles.

It is also important to allow physical inventory in order to keep the information current. Are the reports it offers are enough? Since one of the objectives of the program is going to record the information as time goes on, it is important that the selected program to have a set of reports that allow to be informed at any time of the workshop most important indicators, such as the amount of Unpaid work for credit while driving, consumption of spare parts for repair shop, spare parts consumption per vehicle revenue mechanical, physical inventory, sale of parts to the general public, comparative income / expenses by date range, billing and printing receipts against others. What kind of security of information handled?

Another important factor in choosing a program to manage a workshop is the mechanical terms of safety, they should check whether the program can be used on a single computer or can work on a network is used by multiple users at the same time, if this is the case, you must have a safety mechanism where each person using it is assigned a username and password for identification within the system, and where each is assigned access permissions only to program areas that require work as well in each area work is important that we can define what actions can be performed, for example a secretary can be assigned permissions to capture information but not be allowed to delete it, this way you can ensure that each user can only perform only those functions apply.

Technical Study

On: By: zbol2014

Some have written to me asking to tell you some study techniques that I personally used to deal with the oppositions of prisons. In this first installment I’ll say my favorite. It’s a memory technique that tract of the book techniques of memory for oppositions. It’s a book specializing in the application of techniques to retain information on the study of oppositions. Also interesting thing about the book is that it is written by a person who applied in the study of opposition and worked him. But let’s go to the grain. It is technique is known as the stories and is application when we have to memorize certain terms that we consider very important and required learning. I put an example course.

To my way of seeing one of these listings of terms that we need to know are the principles of organization of the General Administration of the State: hierarchy. Functional decentralization. Functional and territorial devolution. Economy, sufficiency and strict adaptation of the means for institutional purposes. Simplicity, clarity, and proximity to citizens.

Coordination. Learn these terms at a glance can be easy, but taking into account that we must study more than 50 topics and we will probably have to deal with more listings of this type, it is advisable to use a technique that facilitates us the work. Here comes the memory technique of the stories. It is simply to create a story linking the terms of listing resulting us fun and easily assimilable. It has shown that much more rare and extraordinary is the story, easier will be to remember it. You’ll be thinking that it is quite difficult to create a story with these words so technical. The solution is to use a word or phrase cut easier to remember and can relate to the original, although not a priori have any relationship.

Special Technique

On: By: zbol2014

There are significant differences between each stair lift model. To provide flexibility in all rule, go to increase movement impaired people – or, sawmill systems exist to overcome obstacles such as stairs. Different stair lifts are designed individually on the individual needs of restricted persons. In the area of the stair lifts for wheelchair, we distinguish between platform lifts and ceiling-guided wheelchair lifts. Both lift systems first satisfy their purpose, to get from one to the other floor. The installation of the stair lift and the space of the equipment differs Allerdngs much.

The ceiling guided wheelchair lift is the most commonly installed stairlift. The big advantage here is that no matter the stairs lead, the slope and the width of the stairs. A rail system is installed in the ceiling area, where the direction of the rail is flexible and can be done E.g. through doors in different rooms. Due to the ceiling the stairs can otherwise be used against the platform lift in full-width. It will take place any staircase narrowing. This of course also building regulations play a role.

The reliable technology and the special mounting of the wheelchair lift make sure stairs overcoming. A bracket is placed under the push handles on the back of the wheelchair, which runs diagonally between the handles. Mounting plates are attached to the front of the wheelchair. The so-called bar and the tabs are in a mounting adapter to the frame “connected”. This adapter is in / hooked to the ceiling Guide and the stair lift can be used with a remote control in operation. The remote control can be operated not only by the lift users, but also by an attendant. The electrically making stair lift can be loaded with up to 150 kg. The platform lift is mounted on the inside of the staircase on a rail system. This required a correspondingly wide staircase. The wheelchair moves on a platform. There the wheelchair with the simplest means is locked in place and button the platform together with the wheelchair in motion continues on the remote control.

Torsten Hannusch Management

On: By: zbol2014

The GIG has acquired the technical services for five buildings of Lufthansa Cargo AG at Frankfurt Rhein Main airport, as a maintenance partner of Infraserv Hochst. As a specialist for industrial and sophisticated commercial real estate, the GIG to 1 October 2009 was entrusted with the implementation of the order. The GIG has a long-standing expertise in the field of technical management and maintenance. The support of the technical building equipment for warehouses and office buildings with a total area of 140,000 square meters belongs to the scope of the job. The maintenance expert is responsible in particular for the maintenance and repair of heating, climate, ventilation, plumbing and electrical systems, fire alarm and sprinkler facilities. But also the handling as well as roll-up doors and lifts belong to the order volume.

Critical of Lufthansa Cargo AG and Infraserv GmbH & co. short response times of under 30 minutes when errors are Hochst KG. Due to the many years of experience of the GIG in the Germany-wide care of demanding commercial real estate GIG in this area able to score points. We look forward, that we maximum KG build cooperation with Infraserv GmbH & co. at the Frankfurt airport in the field of technical management as a partnership and the segment airports”to expand could.” says Torsten Hannusch, Managing Director of the GIG. Oversees the GIG group in Germany commercial and industrial buildings with a total area of more than 2 million square meters and around 40,000 units.

Contact: GIG technology & facility management GmbH Haller str. 3-6, 10587 Berlin phone: 030/756 87 77-0 fax: 030 / 756 87 77-77 email: the facility management company GIG was founded in 1998 as a specialist in integrated building management. The FM expert sees itself as process partner for the secondary processes of its customers. Currently supports the facility managers in Germany and Austria at over 200 locations of commercial and industrial buildings. The group is in the business areas Office and commercial real estate, residential real estate and industry operate. The FM specialist supervised demanding commercial properties with a total area of more than 2 million square meters, including banks, hotels, data centers, media institutions and shopping malls in the Office of business and industry. The residential real estate business unit serves about 40,000 housing units, here sees itself as operating costs optimizer and Komplettdienstleister the GIG and offered also engineering services. The high-tech facility management and engineering as well as the planning and operation of buildings and clean-room technology for industrial real estate are among the core competencies of the FM service provider in the business industry. In 2009, the GIG together with Infraserv Hochst founded the GIS Infrasite GmbH with a focus on site management and site operations.

Technical Chart Analysis

On: By: zbol2014

tradesignal and TradeSpark present a new version of the interface, with a combination of fundamental and technical analysis of the energy market is possible. Bremen, 21.01.2010, tradesignal charting – and analysis software enterprise edition a new interface version to the market information system of TradeSpark exists. Through this connection, it is even easier to convict required fundamental data and your own business-relevant market data in a central data warehouse and then technically to analyse. Preferably, the new version is aimed at traders and analysts in the energy market, which must represent their data from very diverse sources in a clear form. Already at the EMART Energy in Barcelona this new solution was presented live and caused a stir. tradesignal enterprise edition is a platform for technical chart analysis and systematic trading, which is used in the trading rooms of equity, foreign exchange, futures and energy traders all over the world. The system combines Industriedatenfeeds standardized by international providers, with individual charting and analysis capabilities.

“The cooperation with TradeSpark is a further step in our premium tradesignal enterprise edition for customers in the energy trading to expand.” Just like TradeSpark, we know that for the trading complex and dynamic energy market a standardized software is not enough. With this new data interface we offer an innovation in the field of technical chart analysis.”, Sebastian Schenck, head of sales explains the tradesignal Gmbhr. This combination of technical analysis and Datenmanagment will be to examine live at E-world from February 9-11, 2010 in lunch. Interested parties can contact also so anytime for more information or to test approaches the cooperating companies. Tradesignal Gmbhr the tradesignal GmbH is a software company with international clients in the areas of banks, energy companies and insurance companies. Bremen is the seat of the company. Tradesignal by cooperation partners is represented in the Asian market.

The Company develops and implements solutions for the global financial market. Core competence is the development of software for the technical chart analysis. TradeSpark GmbH & Co.KG the TradeSpark GmbH & co. KG is a software and consulting company headquartered in the technology center of Dortmund and many years of experience in system development for large energy trading house. TradeSpark solutions for an efficient data and information management make traders, analysts and managers of companies in the trading area faster, more productive, and thus give them significant market advantages. by Andrea of F.